Model

   STC-TC USB                 STC-TB USB

Signal Format

     UXGA Color                   UXGA Monochrome

Image Sensor

1/1.8” CCD

Operating Systems:

Windows 2000, XP, Vista (32 bit) & Linux

Drivers:

Viewing Software (Simple & Advanced Menus),
Direct X, Twain, Linux, NI Labview™

Software Development Kits:

Standard SDK & Trigger SDK (for Software and Hardware Triggers) - Full Documentation

Maximum Frame Rate:
 - Full Scan
 - 1/2 Partial Scan
 - 1/4 Partial Scan

15.32 fps
30.63 fps
61.27 fps

Total Picture Element:

1688(H) x 1248(V)

Effective Picture Element:

1628(H) x 1236(V)

Active Picture Element:
 - Full Scan
 - 1/2 Scan
 - 1/4 Scan

1600(H) x 1200(V)
1600(H) x 548(V)
1600(H) x 208(V)

Chip Size:

8.50 (H) x 6.80 (V) mm

Cell Size:

4.40 (H) x 4.40 (V) µm

Pixel Clock Frequency:

36.818MHz

Trigger Method:

Hardware and Software Trigger
(Pulse Width & Edge Preset) - Model Dependant

I/O Ports:

4 Programmable Input / Output Ports
(2 Input Ports & 2 Output Ports) - Model Dependant

Scanning Method:

Full, Partial scanning (1/2, 1/4)

Sync System:

Internal Sync

Scanning System:

Progressive

Shutter Speed:

Auto / Manual (Software Selectable)

Minimum Illumination:

9.5 Lux at F1.2

Extended Low Light Capability:

Extended Low Light Capability via
Hardware or Software Based Pulse Width Trigger

Gain:

Auto / Manual (Software Selectable)

Gamma:

Manual (Software Selectable)

Lens Mount:

C Mount

White Balance:

Auto / Manual / One-shot

Video Output:

USB 2.0 High Speed

Power:
 - Input Voltage
 - Consumption

+5 V through USB port
< 500mA

Temperature:
 - Operating
 - Storage

0°C ~ 40°C (32F° ~ 104°F)
-30°C ~ 65°C (-29°C ~ 149°C)

Dimensions:

51 (W) x 51 (H) x 44.3 (D) mm (2” x 2” x 1.74”)

Weight: 

Approximately 145g